WE ARE RODHOLDERDEPOT.COM A WORLD LEADER IN FISHING ROD STORAGE, FISHING TOWERS, SKI TOWERS & RADAR ARCHES
OUR ARCHES FOLD DOWN FOR PASSING UNDER BRIDGES, STORING YOUR BOAT IN A GARAGE OR BOAT HOUSE AND FOR TRANSPORTING.
WE PROVIDE PERSONAL ATTENTION TO YOUR ORDER. IF YOU NEED HELP ORDERING CALL JOHN @ 586-255-0212
SCROLL DOWN TO SEE OUR WIDE VARIETY OF FISHING/SKIING AND RADAR ARCH
TIRED OF AUTOMATED VOICE RESPONSES - SPEAK WITH A REAL PERSON- PLEASE CALL US ABOUT DISCOUNTS- WE ANSWER AND RETURN ALL CALLS 586-255-0212
Rodholderdepot.com = Better deals and great service.
|
GET THE FISHING RODS OUT OF THE WAY AND FREE UP FLOOR SPACE, BE MORE ORGANIZED. INSTALL ONE OF OUR GREAT FOLD DOWN ARCHES WITH LOTS OF OPTIONS. ARCHES ARE ALSO AN INVESTMENT THAT IMPROVES THE RESALE OF YOUR BOAT. |
IF YOU ARE SERIOUSLY CONSIDERING AN ARCH FOR YOUR BOAT PLEASE CONTINUE READING THIS PAGE WHICH WILL ANSWER MOST OF YOUR QUESTIONS AND CONCERNS. ASK ABOUT DECK/TRACK MOUNTS FOR CISCO OR TRAX TEC.
NOT TO WORRY YOU CAN INSTALL AN ARCH ON YOUR BOAT AND WE WILL HELP YOU FROM START TO FINISH. GOT QUESTIONS ? GIVE US A CALL OR TEXT AT 586-255-0212
ABSOLUTE BEST VALUE AND GREAT AFTERMARKET ARCHES FOR YOUR BOAT. IF YOUR SERIOUS ABOUT AN ARCH YOUR IN THE RIGHT PLACE, SEND US PICTURES OF YOUR BOAT AND CONTINUE READING BELOW.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS IF YOUR IN A HURRY CALL/TEXT We have arches for nearly every boat.
Order now! - Need help ordering your arch ? Just give us a call 1-586-255-0212
It's a simple process 1. Measure across the boat to your potential mounting points, 2.) Measure to ensure you have sufficient clearance above your Bimini (you need approximately 3 Inches of clearance). Write down the measurements. Select Deck/Gunnel or Side/Cuddy Mount. Measure once more to be sure. We offer 2" narrow mounting pads in case you have limited room on your gunnel. See the bottom of this page for information on Powder Coating your arch.
Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher, Lund, Alumacraft, Starcraft, Raider and Rockproof Boats, VEXUS, just to name a few. If you are interested in one of our arches just give us a call 586-255-0212
Adding an arch to your boat is an investment that will not only give a great deal of satisfaction but also will return your investment when you sell or trade in your boat. Most arches are in stock and can ship out in 1 to 2 days. Add one to your cart. you deserve it, your boat deserves it and your family will love it !!!
Maximize the free space on your deck. Store rods, add grab handles, navigation and flood lights, radar pads, cup holders, net holders, antennas and much more. Pull skiers or wake boarders with our FOS-320 Jr.River Cross Over Arch. or add Tigress Clamp On Outriggers to your T-Top.
Measure twice and write down the results. Tips for wiring your arch or t-top are at the bottom of this page. Deck/Track mount are available, call for details.
CLICK ON YOUR SELECTION BELOW FOR DETAILS!Click here for additional article on Powder Coating over Anodized Aluminum
RETURNS MAY BE SUBJECT TO RESTOCKING FEES
TIPS FOR RUNNING WIRES IN YOUR ARCH OR T TOP
The wires will not go through the deck/side mounts, the mounts are solid and they fold down so you need to allow for that when you run the wires. Your wires will need to come up/out near the mount and the wires will go through a hole you will drill in the arch tube 2" inches above the bottom of the tube ensuring you are above the point where the mounts are fully inserted in the tube, the hole should not be larger than 1/2".
Now run/fish the wires to the point/s you want the wires to exit, drill the exit hole in the location desired for the accessories either on the bottom or top side of the tube.
If you plan to fold the arch down to the rear drill the bottom hole in the rear leg. Leave some slack or use marine grade connectors to detach and avoid stretching or breaking the wiring. Use grommets in the holes you drill. If possible run wiring as you assemble the arch or include a line to pull the wires to the exit point.
Laying down your arch - This is a simple process of removing 2 of the allen bolts either from the front mounts or rear mounts and then loosening the remaining bolts in the other 2 mounts.
RODHOLDERDEPOT.COM IS YOUR FISHING ARCH SUPERSTORE
CLICK HERE FOR A FRACTION CONVERSION TABLE
Clamps are designed not slip so they do not close all the way to form a true circle, they are slightly oval, clamp size should be slightly smaller than the outside diameter of your pipe or tube. Example on in the chart above 1.903" is for aluminum tube OD of 2" or roughly 95.5% of the OD.
The table below gives the outside diameter of Pipe. You need to know if you are measuring pipe or tube. The following link will help you understand the difference. Click here for details
Number
Pipe Size Actual Pipe Outside Diameter Inches
Fractional Pipe O.D. (Approximate) Pipe Circumference Actual Pipe Outside Diameter mm 1 3/4 in-p 1.050 1-1/16" 3-5/16" 26.7 2 1 in-p 1.315 1-5/16" 4-1/8" 33.4 3 1 1/4 in-p 1.660 1-21/32" 5-7/32" 42.2 4 1 1/2 in-p 1.900 1-7/8" 5-31/32" 48.3 5 2 in-p 2.375 2-3/8" 7-15/32" 60.3
IPS
O.D. in/mm
I.D. in
3/4" IPS
PIPE SIZE : 1.050", 26 mm O.D. Schedule 40: 0.824" I.D., 0.113" Wall 1" IPS
PIPE SIZE: 1.315", 33mm O.D. Schedule 40: 1.049" I.D., 0.133" Wall 1-1/4" IPS
PIPE SIZE: 1.660", 42 mm O.D. Schedule 40: 1.380" I.D., 0.140" Wall 1-1/2" IPS
PIPE SIZE: 1.900", 48mm O.D. Schedule 40: 1.610" I.D., 0.145" Wall 2" IPS
PIPE SIZE: 2.375", 60mm O.D. Schedule 40: 2.067" I.D., 0.154" Wall
For your protection on Large Dollar orders we may require photo ID
Click here for additional article on Powder Coating over Anodized Aluminum
DO NOT RELY ON THE PRODUCT IMAGES ALONE, FEEL FREE TO ASK AS MANY QUESTIONS AS NEEDED. MEASURE CAREFULLY RESTOCK FEES MAY APPLY ON RETURNS (see notes at the bottom of this page
RESTOCKING FEES: Products returned that are not defective will be subject to a restocking charge of up to 20% of the purchase price of the item being returned. Most returned items cannot be sold as new, they require repackaging, inspection and are generally discounted because the package has been opened. This In addition to the lost labor of packaging, inspection, and paperwork etc. in processing the original purchase. As a customer you generally do not purchase items that you can see have been opened.
