Home


Items: 0
Total: $0.00
Shopcart Checkout
 

 


Home > Store > fishing_ski_radar_arches
Large Fishing Arch - Rocket Launcher, Radar Arch,Fishing Tower - Sr.Uni-Arch #110 1/24
FOS
FOS-110

FOS-6
Your price:  $1,999.00 - $7,069.55


Input - Boat/Model/Year
Mount Type*
Enter Approximate Mounting Width in Inches
Upgrade to Captains Package: 
Add #180 Quick Swivel Rod Holders: 
Add Front Visor: 
Add Net Holders: 
Add visor extension: 
Input amount of extension required.
Select Visor Canvas Color: 
Upgrade mounts to FOS-108-2x4: 
Add Rod Holders: 
Add Standoffs: 
Add Gin Pole: 
Add Light/Antenna Brackets (set of 2): 
Add Radar Pad: 
Add Mounting Wedges: 
(Options marked with * are required)


 Rocket Launcher, Radar Arch - Sr.Uni-Arch
 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES

Have a Pontoon Boat or need a large arch? Here it is.
 
Great for large beamed boats and sail boats. Will hold all of your accessories, davits, solar panels, wind generators, or all of your fishing need.

Our Sr. Uni Arch will span up an 11' beam. You can can our front visor, rod holders and other accessories a you see fit. Up to 84" of height  and 125" wide. Mounts to floor or sides as necessary. Take a few minutes to look at the pictures below to get a better idea if this is the right arch for your boat.
 
Corner braces strengthens this arch and makes it ready for any job. Select standoff option for increasing strength of side mounts.

Unit weighs 125lbs.
 
Lift capacity 300lbs
#110
 
 Very strong and usable unit. Built from 2" schedule 40 ANODIZED aluminum tube.
 
Just like all of our arches, this arch is made to be used, not just for looks. Mount planner board reels, antennas, lights, outriggers and so on.
 
Comes stock with 4 bolt on rod holders.
 
Hollow tube all the way through to run and hide wires.  You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4  20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
 
 
Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally.
 
 
More terrific options for your arch, Click on the image or part no. below.

 
 
 
 
 
 
 
 100-18  107  100-17  100-13  100-20  100-15  100-32  100-21
 

 
   
 
 


 
 
 Captains Pkg
 109  180  FOS-22  100-19  100-26 108-2x4
 100-24
Captains Package upgrades to a total of =

BRONZE Economy Package
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1 Net Holder Part# 109 with 1.91" clamps


SILVER Standard Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
1    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set (2 light brackets)  with 1.91" Clamps

 
GOLD Premium Package
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91"   clamps)
2    Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps)
2    Net Holder Part# 109 with 1.91" clamps
2    Quick Swivel Rod Holders RH with 1.91" Clamps
1    Light Bracket Set 100-13 (2 light brackets)  with 1.91" Clamps
2    Marine Lights 100-20
2    Cup/Drink Holders 100-17  with 1.91" Clamps
2    Universal Multi-Mounts  100-36 with 1.91" Clamps

You can swap some items, however not all items have the same swap value. The rod holders, net holder, radar pad and light bracket set are even swaps, that means you can swap one for the other. There is a $15.00 up charge to swap one of the items included for a the swivel mount rod holder.
 
 
Sr. Uni Arch                  " Free Shipping"
 
Sr. Uni Arch                  " Free Shipping"
Sr. Uni Arch                  " Free Shipping"

 

 
 

     
 
   
NO RETURNS ON INTERNATIONAL ORDERS, DOMESTIC RETURNS RECEIVED IN AS NEW CONDITION ARE SUBJECT TO A 20% RESTOCKING FEE.
 
   
Rodholderdepot.com
7900 Anchor Bay Drive
(established 2010)
Clay Township, MI  48001
UNITED STATES
Phone: 1-586-255-0212


Please leave a phone number and a brief description of any question or concern.
© Copyright 2024 - Rodholderdepot.com
Privacy Policy