Rocket Launcher/ Radar Arch Uni- Arch Captains Package SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES OUR TOP QUALITY FISHING ARCH, DESIGNED FOR EASY INSTALLATION USING COMMON HOUSEHOLD TOOLS, FOLDS DOWN IN MINUTES. ANODIZED FOR PROTECTION FROM SALT WATER. ALL PARTS ARE MACHINED AND WELDED BY ROBOTS FOR THE BEST QUALITY Fits Most Boats. Adjust from 50" up to 96" Wide. Up to 60" Tall. Same great Uni Arch with all the bells and whistles. One great price. All polished anodized arch and components. Captains Package upgrades to a total of = SILVER Standard Package 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set (2 light brackets) with 1.91" Clamps GOLD Premium Package 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 2 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set 100-13 (2 light brackets) with 1.91" Clamps 2 Marine Lights 100-20 2 Cup/Drink Holders 100-17 with 1.91" Clamps 2 Universal Multi-Mounts 100-36 with 1.91" Clamps Just like all of our arches, this arch is made to be used, not just for looks. Mount planner board reels, antennas, lights, outriggers and so on. Very strong and usable unit. Built from 2" schedule 40 ANODIZED aluminum tube. Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube. Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete. We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc. Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats. Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally. CAPTAINS PACKAGE You can swap some items, however not all items have the same swap value. The rod holders, net holder, radar pad and light bracket set are even swaps. There is a $15.00 up charge to swap one of the items included for a the swivel mount rod holder. Check with us if you want to swap items included in the captains package. More terrific options for your arch, Click on the image or part no. below. 100-18 107 100-17 100-13 100-20 100-15 100-32 100-21 Captains Pkg 109 180 FOS-22 100-19 100-26 108-2x4 100-24 FOS-100-33 RADAR MOUNT Click here fro Assembly Instructions:
OUR TOP QUALITY FISHING ARCH, DESIGNED FOR EASY INSTALLATION USING COMMON HOUSEHOLD TOOLS, FOLDS DOWN IN MINUTES. ANODIZED FOR PROTECTION FROM SALT WATER. ALL PARTS ARE MACHINED AND WELDED BY ROBOTS FOR THE BEST QUALITY
Fits Most Boats. Adjust from 50" up to 96" Wide. Up to 60" Tall.
Same great Uni Arch with all the bells and whistles. One great price. All polished anodized arch and components. Captains Package upgrades to a total of = SILVER Standard Package 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set (2 light brackets) with 1.91" Clamps GOLD Premium Package 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 2 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set 100-13 (2 light brackets) with 1.91" Clamps 2 Marine Lights 100-20 2 Cup/Drink Holders 100-17 with 1.91" Clamps 2 Universal Multi-Mounts 100-36 with 1.91" Clamps Just like all of our arches, this arch is made to be used, not just for looks. Mount planner board reels, antennas, lights, outriggers and so on. Very strong and usable unit. Built from 2" schedule 40 ANODIZED aluminum tube. Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube. Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete. We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc. Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats. Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally. CAPTAINS PACKAGE You can swap some items, however not all items have the same swap value. The rod holders, net holder, radar pad and light bracket set are even swaps. There is a $15.00 up charge to swap one of the items included for a the swivel mount rod holder. Check with us if you want to swap items included in the captains package.
Same great Uni Arch with all the bells and whistles. One great price.
All polished anodized arch and components.
Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
More terrific options for your arch, Click on the image or part no. below. 100-18 107 100-17 100-13 100-20 100-15 100-32 100-21 Captains Pkg 109 180 FOS-22 100-19 100-26 108-2x4 100-24 FOS-100-33 RADAR MOUNT
