River/Sport Arch - Captains Package SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher just to name a few. If you are interested in one of our arches just give us a call 586-255-0212 COMES STANDARD WITH: 8 Adjustable Rod Holders 1 Net Holder 2 Quick Swivel Rod Holders 1 Light Bracket Set 4 Backing Plates 4" x 4" Let people know you are serious about fishing, install a fishing arch. It will enhance the value of your boat. How you say ? Well it starts by giving your boat that seriously professional look, increasing the use-able space on your deck, keeping gear up and out of the way, it allows you to carry fishing equipment as well as ski gear. We have lots of accessories that enhance your arch like speakers, grab bars, antennas, drink holders, radar pads, solar mounting pads, net holders, adjustable rod holders, quick adjust rod holders and more. Have questions, just call or email us and we'll get you the answers. This Fishing-Radar Arch, has a contoured top to add some more style and follow rounded biminis. Fits Most Boats. Adjust from 70" up to 96" Wide. Up to 62" Tall. Still has all of the great same features as our other arches. Comes with backing plates, break away mounting hardware (unit will lay down) and 4 bolt on adjustable rod holders. You can add bolt on rod holders and mount them where you need, just like the 4 stock ones. Or get the arch and ad extras later. Very strong and usable unit. Built from 2" schd 40 aluminum tube. Designed to fold down in a matter of minutes. Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube. Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete. We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc. Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats. When you pick an approximate width you will have 5" of adjustment in and out. If you have any questions please feel free to call 1-586-255-0212 Unit weighs 80lbs. Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally. Captains Package upgrades to a total of = BRONZE 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps SILVER 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set (2 light brackets) with 1.91" Clamps GOLD 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 2 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set 100-13 (2 light brackets) with 1.91" Clamps 2 Marine Lights 100-20 2 Cup/Drink Holders 100-17 with 1.91" Clamps 2 Universal Multi-Mounts 100-36 with 1.91" Clamps . More terrific options for your arch, Click on the image or part no. below. 100-18 107 100-17 100-13 100-20 100-15 100-32 100-21 Captains Pkg 109 180 FOS-22 100-19 100-26 108-2x4 100-24
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS CALL FOR SHIPPING COST QUOTE TO LOCATIONS OUTSIDE THE LOWER 48 STATES
Our arches work well on most aluminum river boats such as Bentz Boats, Koffler Boats, Alumaweld, Hewescraft, Bratt Jet, Rogue, RiverPro, RiverHawk, Thunderjet, Boulton, North River, Weldcraft, KingFisher just to name a few. If you are interested in one of our arches just give us a call 586-255-0212
COMES STANDARD WITH:
Let people know you are serious about fishing, install a fishing arch. It will enhance the value of your boat. How you say ? Well it starts by giving your boat that seriously professional look, increasing the use-able space on your deck, keeping gear up and out of the way, it allows you to carry fishing equipment as well as ski gear. We have lots of accessories that enhance your arch like speakers, grab bars, antennas, drink holders, radar pads, solar mounting pads, net holders, adjustable rod holders, quick adjust rod holders and more. Have questions, just call or email us and we'll get you the answers.
This Fishing-Radar Arch, has a contoured top to add some more style and follow rounded biminis.
Fits Most Boats. Adjust from 70" up to 96" Wide.
Up to 62" Tall. Still has all of the great same features as our other arches. Comes with backing plates, break away mounting hardware (unit will lay down) and 4 bolt on adjustable rod holders.
You can add bolt on rod holders and mount them where you need, just like the 4 stock ones. Or get the arch and ad extras later.
Very strong and usable unit. Built from 2" schd 40 aluminum tube. Designed to fold down in a matter of minutes. Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube. Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete. We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc. Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats. When you pick an approximate width you will have 5" of adjustment in and out. If you have any questions please feel free to call 1-586-255-0212 Unit weighs 80lbs. Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally. Captains Package upgrades to a total of = BRONZE 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps SILVER 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set (2 light brackets) with 1.91" Clamps GOLD 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 2 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set 100-13 (2 light brackets) with 1.91" Clamps 2 Marine Lights 100-20 2 Cup/Drink Holders 100-17 with 1.91" Clamps 2 Universal Multi-Mounts 100-36 with 1.91" Clamps .
Hollow tube all the way through to run and hide wires. You will need to drill an access hole near the bottom of one of the legs above the mounts approximate 1" above the top of the mounts when the mounts are fully seated in the tube and an exit hole near where you will be mounting your lights on the top cross tube.
Insert a wire during assembly to serve as a cord for pulling the wires through the tube when the assembly is complete.
We recommend using a good quality automotive anti-seize compound on all threads. While not mandatory this additional step will save you work later should you decide to move or disassemble rod holders etc.
Two different style mounts "side and deck". Mounting holes are .278 diameter and are sized for 1/4 20 screws. Stainless steel screws are recommended. Also backing plates are recommended. You may need to cut small amounts of flotation foam under the gunnels on some boats.
When you pick an approximate width you will have 5" of adjustment in and out. If you have any questions please feel free to call 1-586-255-0212 Unit weighs 80lbs. Assembly required. Bolts,nuts and lock washers for holding the bases to the deck or cabin side are not included due to the wide variety of hull and or cabin thicknesses. Purchase the stainless steel bolts, nuts, fender washers and lock washers locally. Captains Package upgrades to a total of = BRONZE 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps SILVER 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 1 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set (2 light brackets) with 1.91" Clamps GOLD 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 1.91" clamps) 2 Additional Bolt on Rod Holders Part# 107 ( 2 with 2.375" clamps) 2 Net Holder Part# 109 with 1.91" clamps 2 Quick Swivel Rod Holders RH with 1.91" Clamps 1 Light Bracket Set 100-13 (2 light brackets) with 1.91" Clamps 2 Marine Lights 100-20 2 Cup/Drink Holders 100-17 with 1.91" Clamps 2 Universal Multi-Mounts 100-36 with 1.91" Clamps .
