Grab Rail 1" OD  304 Stainless Steel Tubing can also be used with clamp on Rod Holders as a Rod Rack/Rocket Launcher, select rod holders that fit 1" OD tubing

Cisco Rod Rack/Rocket Launcher Backing Plates

 

These track backing plates are designed to reinforce each of the mounting stress points where the rod racks connect to to your hard top or gunnel.  We recommend these since they reinforce the underneath mounting hole locations whenever possible.  These plates are made from solid aircraft grade aluminum.

Fits 7/8" and 1" diameter round rail, and 1" square rail. For all Scotty post mount rod holders. Works with No. 241 side/deck mounts. Includes stainless steel fasteners.

Weight = 20 lbs

From cat fishing to trolling for big water fish like Mahi Mahi or yellow fin tuna, our stout four rod rocket launcher was built to handle the action. It's universal design allows for just about any mounting location you can think of. The two outer holders shoot away from the center approximately 15° and down approximately 10°. The two inside holders shoot straight back. Comes with black caps on the rod holders!! Anodized to protect against salt corrosion.

Neptune Tackle Storage Bag

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Taco Marine introduces a much improved tackle storage system for your leaning post or as a tackle storage system on your boat. Perfect for the traveling angler who destination fishes. Made of highly durable 1000 Denier fabric and ballistic nylon bottom along with YKK Marine Grade zippers. These high quality materials not only protect all gear from the saltwater elements, but also provide a waterproof seal and durability. Due to it's design and shoulder carrying strap, the bag is easy to remove from the leaning post allowing the bag to travel with you to and from the boat with comfortable ease.

Features:

• 1000 Denier fabric withstands the harsh saltwater elements
  
• Ballistic nylon bottom provides a waterproof seal
  
• YKK marine-grade zippers are strong and durable
  
• Two double zippered outer pockets ideal for up to five fluorocarbon spools
  
• Two 9" inner pockets ideal for storing personal items
  
• One 29" long tool compartment for safely storing all tackle gear
  
• Includes welt track clips for hanging on Taco Marine leaning post
  
• Center storage space has one of the largest tackle capacities on the market today accommodating 4 full size 3700 Plano boxes, 4 Plano 3600 boxes and 4 smaller Plano boxes
  
• Attractive carbon gray fabric with black trim and hard shell bottom liner with 6 rubber feet and drain holes
  
• Limited 1 year Warranty
  
• Made in USA

Cisco Rocket Launcher - 8 Unit

Rod Stationary Storage Rack

 

 SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

 

Bends to conform to any hardtop, fasten with stainless steel bolts and fender washers.

50 3/4" Over All Length - Tubes are 10" inches long and 2" inches in diameter. Storage units are available with six, eight, ten and twelve tubes using a ¼" thick aluminum base flexible enough to mount on most hard tops. The tubes have a 6-3/4" centerline spacing and remove easily from the base which is great for winter wrapping of the boat! Our stationary storage racks are built from solid aluminum and anodized to military specs. Units are available in increments of six, eight, ten and twelve tubes. Tubes are threaded and are capable of being screwed on and off for storage purposes; color upgrades to black, bright blue, and bright gold are available.

 

Select either Angled or Vertical and a color from the options box ! 

Cisco Boat Rocket Launcher  10 Unit Boat Rod Stationary Storage Rack

 

Bends to conform to any hardtop, fasten with stainless steel bolts and fender washers.

 

64 1/4" Over All Length. Tubes are 10" in length and 2" inches in diameter. Storage units are available with six, eight, ten and twelve tubes using a ¼" thick aluminum base flexible enough to mount on most hard tops. The tubes have a 6-3/4" centerline spacing and remove easily from the base which is great for winter wrapping of the boat! Our stationary boat rod storage racks are built from solid aluminum and anodized to military specs. Units are available in increments of six, eight, ten and twelve tubes. Tubes are threaded and are capable of being screwed on and off for storage purposes; color upgrades to black, bright blue, and bright gold are available.

 

Select either Angled or Vertical and a color from the options box ! 

Built with top quality marine grade 1/2" UV resistant starboard. All aluminum frame and shelf. 2 leg construction hangs over side of dock giving you more dock space. Keep your dock free of fish scales and other debris with a 2 leg fish cleaning station from C& M Marine

50"L x 23"D x 38"H

Cisco Boat Rocket Launcher  12 Unit Rod Stationary Storage Rack

 

Bends to conform to any hardtop, fasten with stainless steel bolts and fender washers.

 

 

77 3/4" Over All Length. Tubes are 10" in length and 2" inches in diameter. Storage units are available with six, eight, ten and twelve tubes using a ¼" thick aluminum base flexible enough to mount on most hard tops. The tubes have a 6-3/4" center line spacing and remove easily from the base which is great for winter wrapping of the boat! Our stationary boat rod storage racks are built from solid aluminum and anodized to military specs. Units are available in increments of six, eight, ten and twelve tubes. Tubes are threaded and are capable of being screwed on and off for storage purposes; color upgrades to black, bright blue, and bright gold are available.

 

Select either Angled or Vertical and a color from the options box ! 

Dolphin Pro leaning post is an upgraded design based on Dolphin original leaning post, 4 rod holders are welded directly on the frame. It is universal to fit most fishing boats, the length of the seat is 28in, and the width is 15.7inch.

RWRL01	RWRL02	CMRL4
HEAVY DUTY   Rough Water Rocket Launchers have sleek rounded corners and are built heavy duty.  Comes with a Garelick pedestal, the pedestal measures: 2 7/8"  pedestal diameter, 9 1/2" base diameter and  stands 30 1/2" High with pedestal.   4-Cast Stainless Steel Rod Holders with a 4" Round Flange - your choice of 15 degree or 30 degree 2 Stainless Steel Drink Holder	HEAVY DUTY   Rough Water Rocket Launchers have sleek rounded corners and are built heavy duty. Comes with a Garelick pedestal, the pedestal measures: 2 7/8"  pedestal diameter, 9 1/2" base diameter and stands 30 1/2" High with pedestal. Standard color is white. 41 1/2"W x 19"D x 30 1/2"H 4 Cast Stainless Steel Rod Holders with a 4" Round Flange-Your Choice of 15 or 30 Degree Built in Recessed Rigging Tray 2 stainless steel cup holders	LIGHT DUTY - NOT SUITABLE FOR LARGE ROD/REELS OR TROLLING This product comes with 4 stainless steel rod holders. Garelick 30" anodized pedestal- 2 7/8" dia. It has a 9" round pedestal base which mounts with 6 bolts.   36"W x widest part at center 11 1/4"L x 30"H

This Leaning Post w/ Storage comes with all stainless steel (corrosion-proof) hardware, white pleated upholstery and ultra-violet resistant white gelcoat.The seat opens for storage and the doors on the back of unit also open for extra storage. An optional backrest is available. This product comes with 4 stainless steel rod holders, 15 or 30 degree or you can mix and match with cup holders. Overall width and length measurements include flange. This leaning post w/ storage is perfect for boats 21' to 28" long.

 

 

Adding Backrest

• Optional removable back rest available, comes with 4 welded on aluminum rod holders and powder coated finish - $585.00
• Unit can be ordered with out the storage doors on back-call for pricing