|
|
CLAMP ON ROD HOLDER Adjustable Mid Mount Rod Holder Aluminum - CHOOSE CLAMP TUBE SIZE C.E. SMITH 1/24
C.E. SMITH
Adjustable Mid Mount Rod Holder Aluminum Choose Tube/Rail Clamp O.D. Size Includes Sleeve & Hex Key
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features: Use calipers to measure O.D. Tube/Rail Size
- Style: Adjustable Mid Mount
- Fits rails with measured OD
- Made from Marine Grade Aluminum
 WARNING:
This product can expose you to chemicals including
di(2-ethylhexyl)phthalate (dehp) which is known to the State of
California to cause cancer, birth defects or other reproductive harm.
For more information go to P65Warnings.ca.gov.
|
Click for larger image
|
|
CLAMP ON ROD HOLDER - ADJUSTABLE MID MOUNT - WHITE POWDER COATED CHOOSE RAIL SIZE- C.E. SMITH 1/24
C.E. SMITH
Adjustable Mid Mount Rod Holder - Choose Rail Size - White Powder Coat Aluminum with Sleeve & Hex Key
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
C.E.
Smith's line of white powder coated clamp-on rod holders offer a great
alternative to stainless steel. These rod holders are constructed of
marine grade aluminum that has been 100% anodized for functionality and
style.
Features: Use calipers to ensure correct tube/rail O.D.
- Style: Adjustable Mid Mount
- Fits rails with measured OD
- Made from Marine Grade Aluminum
WARNING:
This product can expose you to chemicals including
di(2-ethylhexyl)phthalate (dehp) which is known to the State of
California to cause cancer, birth defects or other reproductive harm.
For more information go to P65Warnings.ca.gov.
|
Click for larger image
|
|
Single Rod Holder, Anodized - DOLPHIN 1/24
DOLPHIN
DOLPHIN Single rod holders
YOU MUST CHOOSE A SHIPPING OPTION
The original dolphin single rod holders were created to hold 1 rod and adjustable every 18 degrees. The single rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch, 1.5inch pipe. You will have a place for you fishing rods in a safe place off your floor. The single rod holders can be angled by rotating the clamp around your frame and also side to side with the adjustable clamp.
There is a laser engraved logo along the tube so you know you are purchasing the genuine article from Dolphin. The smooth clear anodized finish to the twin tubes and clamps makes these rod holders so easy to keep clean. A quick wash, rinse and wipe down after a great days fishing is all it needs. No hard polishing to get these puppies looking great all the time.
Materials.
The clamp fitting is cnc machined from solid 6061 aircraft aluminum. The rod holder are cold-drawn tubing which is smooth polished and anodized for superior protection. All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment. We source and only use high Quality raw materials for pure performance to look after your gear.
Size.
The clamp size is 2 inch, we supply a rubber insert for 1.5inch size tubing. The rubber insert will protect your Dolphin t top frame. The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle the rods sideways to an angle that suits your needs
|
Click for larger image
|
|
Clamp on Rod Holder Adjustable Rod Holder for 7/8" - 1" tube
1/24
Whitewater Marine Hdwe
- Versatile rod holder design allows a full 360 deg. adjustment
- Highly polished SS tube with a black plastic liner to protect your rods
- For 7/8" - 1" tube
Tube I.D.: 1-5/8"
Tube Length: 9"
|
Click for larger image
|
|
Clamp on Adjustable Rod Holder 316 Stainless Steel for 3/4" - 1-1/4" tube 1/24
WHITEWATER MARINE
- 316 Stainless Steel Cast Rod Holder Clamp
- Versatile rod holder design allows a full 360 deg. adjustment
- Highly polished SS tube with white plastic liner to protect your rods
- For 3/4" - 1-1/4" tube
Tube I.D.: 1-3/4"
Tube Length: 9-1/2"
 |
| PART NO. |
A |
B |
C |
| 53300SL |
9-3/4" |
2-1/4" |
1-5/8" |
|
|
Click for larger image
|
|
Pontoon Rod Holders Square Rail Adjustable Clamp-on Rod Holders fits 1" to 1-1/4" square rail 1/24
C.E. Smith
C.E. Smith Pontoon Boat Rod Holders Square Rail Adjustable Clamp-on Rod Holders
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices.
Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp. Angle around the rail is infinitely adjustable. Angle to the left or right adjust in 15 degree increments and is a 9" tall tube with 1-5/8" ID.
Includes everything you need to install, mounting screws and the right Hex key needed to make the angle adjustment and to tighten the clamp in place.
Enjoy your pontoon even more with our new Pontoon Rod Holders
- Our clamp fits 1" to 1-1/4" square rail
- Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp
- Angle around the rail is infinitely adjustable
- Angle to the left or right adjusts in 15 degree increments
- 9" tall tube with 1-5/8" ID
- Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.
|
Click for larger image
|
|
Rail Mount Clamp on Rod Holder 1"0 Rod holder S.S. Whitecap Bluewater Series 1/24
WHITECAP INDUSTRIES
Rail Mount Clamp on Rod Holder 1"0 Rod holder S.S.
Whitecap Blue water Series
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
CLAMP ON ROD HOLDERS MADE FROM STAINLESS STEEL ARE RUGGED AND RELIABLE
Bracket: 316 S.S. - Fits 7/8"& 1" Rails
Material: 304 Stainless Steel
|
Click for larger image
|
|
Clamp-On Rod Holder
Choose 1", 1 1/4" or 1 1/2" Clamp Size Polished SS Adjustable-Tigress 1/24
Tigress
TIGRESS 1" Polished SS Adjustable Clamp-On Rod Holder
SHIPS FREE IN LOWER 48 STATES
Measure the Outside Diameter of the tube/pipe before ordering. Clamp size should be slightly smaller than the rail you are clamping the rod holder to.
- Choose the angle you need while providing the versatility of mounting either horizontally or vertically
- Clamp-on rod holders are sized IPS
- Includes a heavy white vinyl liner
- Rod holder ID 1-5/8"
| IPS |
|
|
O.D. in/mm
|
|
I.D. in
|
|
| 3/4" IPS |
|
PIPE SIZE : |
1.050", 26 mm O.D. |
Schedule 40: 0.824" I.D., 0.113" Wall |
| 1" IPS |
|
PIPE SIZE: |
1.315", 33mm O.D. |
Schedule 40: 1.049" I.D., 0.133" Wall |
| 1-1/4" IPS |
|
PIPE SIZE: |
1.660", 42 mm O.D. |
Schedule 40: 1.380" I.D., 0.140" Wall |
| 1-1/2" IPS |
|
PIPE SIZE: |
1.900", 48mm O.D. |
Schedule 40: 1.610" I.D., 0.145" Wall |
| 2" IPS |
|
PIPE SIZE: |
2.375", 60mm O.D. |
Schedule 40: 2.067" I.D., 0.154" Wall |
STAINLESS ADJUSTABLE CLAMP ON ROD HOLDER SIZED PIPE
• Choose the angle you need while providing the versatility of
mounting either horizontally or vertically.
• High Polish Stainless Steel.
• Clamp-On Rod Holders are sized IPS Pipe.
• Includes a heavy white vinyl liner.
• Rod Holder ID 1 5/8”.
63655
63656
63657
| PART | CLAMP SIZE | FINISH |
| 88191 |
1” |
Silver |
| 88192 |
1-1/4” |
Silver |
| 88193 |
1-1/2” |
Silver |
|
|
|
|
Click for larger image
|
|
Clamp-on Rod Holder Stainless Steel Clamp-On Adjustable - Fits 7/8" & 1" O.D. Tubing TACO 1/24
TACO
Stainless Steel Clamp-On Rod Holder
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Adjustable 316 stainless steel clamp-on rod holder fits virtually any pipe or tube. Internal locking positions turn every 18 degrees to any mounting position. Fits O.D. tubing 7/8" & 1".
1-3/4" inside diameter.
CLICK HERE FOR LITERATURE:
|
Click for larger image
|
|
Clamp-On Adjustable Rod Holder Stainless Steel - Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube) 1/24
TACO
Stainless Steel Clamp-On Rod Holder
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Stainless Steel
Type 316
Polished
Features and Benefits
- Adjustable clamp to fit multiple pipe and tube sizes
- For use on vertical and horizontal pipe/tube
- Rotate and lock in fishing angle
- Rotates and locks every 18°
- Form-fitted PVC White Liner
Specifications:
Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube)
Location:T-Top Ring, Leaning Posts, Poling Platforms
Rod Holder Inside Diameter: 1-5/8"
Click here for literature
|
Click for larger image
|
|
Clamp-On Adjustable Rod Holder - Fits 1-11/16" & 1-15/16" O.D. Pipe TACO Stainless Steel 1/24
TACO
Stainless Steel Clamp-On Rod Holder
Stainless Steel Type 316 Polished
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Features and Benefits
- Adjustable clamp to fit multiple pipe and tube sizes
- For use on vertical and horizontal pipe/tube
- Rotate and lock in fishing angle
- Rotates and locks every 18°
- Form-fitted PVC White Liner
Specifications:
Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe)
Location:T-Top, Leaning Post & Poling Platform Leg
Rod Holder Inside Diameter: 1-5/8"
Click here for literature
:
|
Click for larger image
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
