Track Mount    The mount fits tracks that accepts 3" wide x 1/4" thick track plates(Bert's, Traxtech, Titelok).  Therefore, you do not have to replace your existing track system unnecessarily. (Track not included with the mount;  may be purchased separately.)

Part Number: MTU42 CHOOSE FROM OPTIONS

The 42° Lund mount is machined from a solid piece of aluminum bar and is pressed to create the angled bend.  The slotted keys are made from stainless steel and are attached to all solid aluminum components which complete the round knobs.  You will know when your unit is locked into place when the red line gauge is in the vertical position.  Also, provided with this unit are two synthetic levelers at the end of the unit to give the mount added support and to protect the gunnel from unnecessary scratches.

 A single rod holder can be mounted to this unit, or for use with multiple rod holders, the cross-plate can either be mounted directly to the mount or with 2" stanchion risers!  Cannon, Big Jon and Walker downrigger adapter plates are also available.

Longer lengths of track can be secured to multiple Lund mounts to create a strong, versatile and easily removable track system.  Contact us with your measurements and we can get a setup designed just for you!

The dimensions of the top mounting surface of this bracket are 3" x 4".

  *Track or cross plates not included.

 Click on image to enlarge

 

Part Number: XPRHS

These black protective sleeves are a perfect way to protect your rod holders when they are not in use.  This expandable sleeve will fit snugly over the entire rod holder and will protect the tube from scratches.

 

The sleeve simply slides onto the rod holder to allow for easy covering and removal.  The top of the netting also folds inside the top of the tube to protect the rim of the tube from damage.

Thumbscrew Mounting Plate - This plate can be mounted to any location on your gunnel and can secure any rod holder units on a thumbscrew base plate. This plate is also capable of securing a downrigger.

 

The hole pattern is also the same as Big Jon’s so you do not have to worry about drilling additional holes in your boat; this plate will mount directly to the pre-drilled holes

Cisco Sure-Stop Track

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible.

 

Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.

 

Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

 

  Overall with is 3-1/2 Inches

The universal mounting plate is a great way to adapt your existing rod holders, tracks and downriggers from any major fishing manufacturer to your boat without having to drill any additional holes.  Simply secure this plate to any mount for a multi unit to create a versatile universal mounting system.  

This plate is composed of solid 3/8”  thick anodized aluminum and is 6” x 6” square.   

Cisco Sure-Stop Track

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible.

 

Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.

 

Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

 

  Overall with is 3-1/2 Inches

 

Click on the image to enlarge

NEW - Innovative Trolling System Puts You In Control

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Aluminum Mounting Track

This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

 

The system is compatible with Cannon, Bert’s, and Traxtech track system products

 

 

Cisco - 18 inch Sure-Stop Track- Choose Standard Track or Multi Mount Capable

 

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible. Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

 Overall with is 3-1/2 Inches

 

or

 

Part Number: TRK18-MM

Cisco Sure-Stop track is truely the finest track available on the market. Every piece is anodized to military specs and is designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible. We also offer our 18" track to come standard for use with any of our mounts for Multi-Rod Mounts.  Looking for track to be mounted on a thumbscrew, quick release, rails, or Lund boats?  Check out all of our Mounts for Multi-Units and see which system would work best for you!  If you have any questions please contact us.

Special features that hold our standards of track higher than our competitors are listed below, in fact the only standard not held higher than our competitors is the price.  *Mount purchased separately*

 

  Click on image to enlarge TRK18

 

 

Multi mount capable

 TRK18-MM

 

 

 

Cisco Sure-Stop Track

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible. Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features
Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

  Overall with is 3-1/2 Inches

 

Click on image to enlarge

 

 

NEW - Innovative Trolling System Puts You In Control

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

No matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.

Adjustable Rod Holder
Single Axis

This 10" holder utilizes 6 up and down locking positions, and delivers 90° of side-to-side rotation. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. Includes a UV-resistant end cap to protect rod and reel.

 

Cisco Sure-Stop Track

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible.
Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects:

Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features:

Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

  Overall with is 3-1/2 Inches

 

Click on image to enlarge

NEW - Innovative Trolling System Puts You In Control

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

No matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.

Adjustable Rod Holder
Dual Axis

Experience 360° of rotation at the push of a button with this 10" holder. It features six up and down locking positions, a pistol grip release for quick, one-handed angle changes and a ratcheting adjustment system that allows you to quickly position the holder vertically. Includes a UV-resistant end cap to protect rod and reel

Tube Style Rod Holder

The inside diameter of each aluminum tube is 1 5/8". The wall of the tube is 3/16" thick creating the most rigid tube on the market.  This heavy wall tube gives us the ability to machine a smooth radius on top thus no rubber caps to come loose.

The positive locking head of the Cisco Fishing Systems rod holder will adjust to any angle from zero up to 90 degrees by actuating the padded lever. The rod holder simply indexes in a radial movement every 18 degrees by lifting and turning the spring-loaded mechanism. These features offer the fisherman a multitude of possibilities for positioning their rods.

They are available as single, double, triple and quad setups.

Triple Rod Holders

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon.

Includes 3 No. 230 Power Lock rod holder

 

Sure-Stop Tracks

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible.Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.

 

Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48", 60" and 72”. Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

 

  Overall with is 3-1/2 Inches

 

Click on Image to enlarge

 

 

Sure-Stop Tracks

Our newly developed and beautifully anodized track has been designed to help make using a track system on your boat as effortless, safe, convenient and inexpensive as possible. Most other track manufacturers overlook many details which can be easily fixed to remove the small nuisances customers have found with their track. While designing this no shortcuts were taken to ensure that the track provided to our customers is as safe and luxurious as possible.

 

Track is available in standard lengths of 6”, 12”, 18”, 24”, 36”, 48”, 60" and 72". Custom lengths as always are available upon request. It is compatible with Bert’s, Traxstech and Cisco Fishing Systems products. All of the features listed below are innovative ways to give you the premier quality you deserve.

 

Track Features

Easy Access Incline: Every piece of Cisco track sold comes standard with an easy access incline on the open edges of the track. This incline has been machined into the solid aluminum to assist you when sliding track mounts and other accessories into the track. While other track manufactures simply saw their track to length, we machine it and remove any sharp edges so that the mounts simply glide into the track without resistance.

 

Safety Aspects: Another feature which sets us apart from our competitors is the process each track goes through to make certain that no edge or corner on the track is left unrounded. As you can see in the photo below, we machine a radius on every corner of the exposed track. This is extremely important to us to guarantee the safety of the friends and family while boating. You no longer have to worry about someone putting their hand on the track in rough waters for support and getting hurt in the process.

 

End Stops and Mounting Features: Our track was engineered so that users could get the most out of the product at the best price possible; that is why every piece of track comes standard with end stops at each corner of track. This 1/4" - 20 threaded end stop is also capable of accepting thumbscrews so nothing can slide outward from the track while running the boat, yet be easily removed at the dock. The track is also slightly thicker at the base than other brands to help disperse pressure on the gunnel of the boat when mounted. Industrial grade stainless steel mounting hardware is provided. All track units up to 24” are capable of being converted for gimbal mounting upon customer request at no additional cost. Track comes with mounting hardware:  1-3/4" stainless steel bolts, stainless fender washers and an industrial stainless locking nut.

 

  Overall with is 3-1/2 Inches

 

Click on image to enlarge