Home > Store > 30_degree > ce_smith_30_degree

Rod Holder Replacement Liners for C.E. Smith 70 Series Flush Mount - White 12/20
C.E. SMITH

Rod Holder Replacement Liners for C.E. Smith 70 Series Flush Mount - White

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

If you have had your C.E. Smith flush mount rod holders for awhile you may need to consider replacing the liners. These liners protect your rods from wear and tear. Although they last quite a long time eventually they will need to be replaced. Rubber liners reduce rattle and noise as well.

Replacement liner for 70 series in-gunnel & clamp-on rod holders. UV resistant vinyl liner protects rods. Notched bottom engages the gimbal bar in all 70 and 80 series rod holders to prevent spinning. Press into rod holder then cut off excess length. Fits Smith rod holders and many other brands.

9-5/8" long

1-7/8" outer diameter

1-5/8 inner diameter

White or Black Vinyl

Cut to desired angle and length

53674A

Price: $19.95

Click for larger image

Rod Holder Replacement Liners for C.E. Smith 80 Series Flush Mount - White 12/20
C.E. SMITH

Liners for C.E. Smith 80 Series Flush Mount - White

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Replacement liner for 80 series in-gunnel rod holders. UV resistant vinyl liner protects rods. Notched bottom engages the gimbal bar in all 70 and 80 series rod holders to prevent spinning. Press into rod holder then cut off excess length. Fits Smith rod holders and many other brands.

11" long

2-1/8" outer diameter

1-7/8 inner diameter

White vinyl

Cut to desired angle and length

If you have had your C.E. Smith flush mount rod holders for awhile you may need to consider replacing the liners. These liners protect your rods from wear and tear. Although they last quite a long time eventually they will need to be replaced. Liners reduce rattle and noise as well.

Product Description

Replacement liner for 80 series in-gunnel rod holders. UV resistant vinyl liner protects rods. Notched bottom engages the gimbal bar in all 70 and 80 series rod holders to prevent spinning. Press into rod holder then cut off excess length. Fits Smith rod holders and many other brands.

11" long

2-1/8" outer diameter

1-7/8 inner diameter

White vinyl

Cut to desired angle and length

53684A

Price: $19.95

Click for larger image

Rod Holder Backing Plates for CE SMITH 70 SERIES ROD HOLDERS 9/21
CE Smith

33219 CE SMITH BACKING PLATE FOR 70 SERIES ROD HOLDERS

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Backing plates are a good investment that can save your gunnels from wear and tear which is especially true when your flush mount rod holders are used with downriggers. The heavy load from downriggers and constant tension can begin to loosen screws and wear the opening where the flush mount enter the gunnel. Trolling with big lures and the stress on flush mount rod holders from hooking a big fish can lead to failure when not using backing plates. Play it safe and install backing plates on your flush mount rod holders.

53673A/33219

Price: $34.95

Click for larger image

Rod Holder Backing Plates for CE Smith 80 Series 8/22
CE Smith

C.E. Smith Backing Plate f/80 Series Rod Holders

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Backing plates are a good investment that can save your gunnels from wear and tear which is especially true when your flush mount rod holders are used with downriggers. The heavy load from downriggers and constant tension can begin to loosen screws and wear the opening where the flush mount enter the gunnel. Trolling with big lures and the stress on flush mount rod holders from hooking a big fish can lead to failure when not using backing plates. Play it safe and install backing plates on your flush mount rod holders.

Price: $39.95

Click for larger image

Flush Mount Rod Holder, 30 Degree 1 5/8" I.D. C.E.Smith 11/22
C.E. SMITH

C.E. Smith FLUSH MOUNT

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

FLUSH MOUNT

Stainless Steel Rod Holders

Tough enough for heavy tackle

Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.

They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.

Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".

ANGLE:	30°

1-5/8" inner diamerter
2" outer diameter
9" tube
Safe rounded bottom
1/2" pipe threaded drain hole
316L Stainless Steel
Cap 4-1/2" long x 3-5/8" wide

Price: $109.95 - $152.85

Click for larger image

Flush Mount Rod Holder 1-5/8" I.D. , 30 Degree 9" Depth C.E. Smith 9/21
C.E. SMITH

Flush Mount Rod Holder 1-5/8" I.D. , 30 Degree 9" Depth

C.E. Smith 70 Series

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

FLUSH MOUNT Stainless Steel Rod Holders

With 1/2" Threaded Drain

These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.

They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place

ANGLE: 30°

LENGTH: 9"

I.D.: 1-5/8"

Price: $119.95 - $152.85

Click for larger image

Flush Mount Rod Holder, 30 Degree 10.5" Deep 1-7/8" I.D. C.E. Smith 80 Series 9/21
C.E. SMITH

FLUSH MOUNT Stainless Steel Rod Holders 30 Degree 1-7/8" I.D

. C.E. Smith 80 SERIES

SHIPPING INCLUDED TO LOWER 48 STATED DESTINATIONS

Your can't go wrong with C.E. Smith Rod Holders.

Product Description

Stainless Steel Rod Holders with 1/2" Pipe Threaded Drain Hole

These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.

They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place

ANGLE:	30°
LENGTH:	10-1/2"
I.D.:	1-7/8"

Price: $139.95 - $177.85

Click for larger image

Swivel Base Flush Mount Rod Holder, 30 Degree 1-7/8" I.D. C.E. Smith Stainless Steel 9/21
C.E. SMITH

C.E. Smith Stainless Steel Flush Mount

Swivel Base Rod Holders 30 Degree

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Your get more for your money when you buy C.E. Smith

Stainless Steel Flush Mount Swivel Rod Holders

80 Series
30°
10-1/2" Length
1-7/8" ID

Swivel base ideal for bent butt rod fishing
Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish
Cast 1-piece stainless steel swivel cup
Super smooth turning precision-machined 1/2" pivot with fine threads

Price: $199.95 - $232.85

Click for larger image

Categories:

0_(zero)_degree
15_degree
30_degree
cisco_fishing_systems
coolers_tuna_tubes
crabbing
downriggers
fishing_reels
fishing_ski_radar_arches
foul weather gear
gemlux_products
glp_fishing_systems
horizontal_clamp-on
life_rafts
marine_antennas_hdwe
marine_battery_chargers
marine_compass
marine_electronics
marine_radios
marine_radios_handheld
marine_solar_charging_systems
mate_series_rod_cup_holder
mini_drifter_boats
mooring_whips
muddcreek_tackle
night vision,radar
rod_holder_inserts_liners
rod_rigger
shallow water anchors
shore_power_systems
swimplatforms_and__ladders
t-tops
tackle_and_storage_centers
trailer_accessories
trolling
two_way_clamp_on
underwater_lighting
vertical_clamp_0n
wakeboards
windshied_wiper
flush_mount_rod_holders
clamp_on_rod_holders
bulkhead_rod_holders
adjustable_rod_holders_and_track_systems
rocket_launchers
outriggers
marine_hardware_and_accessories_&_bow_thrusters