|
|
ADDITIONAL SHIPPING FOR D STEWART ORDER TO HAWAII
ADDITIONAL SHIPPING COST TO SHIP PRODUCT 31160 LEES BULKHEAD ZERO DEGREE RH570 TO HAWAII
|
no picture
|
|
Lee's Rod Butt Extender f/Standard & Heavy Swivel Base Rod Holders 4/24
LEE'S TACKLE
Rod Butt Extender for Standard & Heavy Swivel Base Rod HolderS
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Comes
with one rod butt extender that is extra strong! Made of pure stainless
steel. Used on short-butt rods and heavy-duty rod holders and will now
fit in heavy swivel base rod holders.
*Sold as a single
|
Click for larger image
|
|
Lee's 0° Stainless Steel Flush Mount Rod Holder - 2" O.D. 3/23
LEE'S
LEES - Flush Mount Rod Holder Zero Degree 2" Diameter
SHIPS FREE IN LOWER 48 STATES
RH-527VS Medium 0° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
RH527VS
|
Click for larger image
|
|
Lee's 0° Stainless Steel Flush Mount Rod Holder - 2.25" O.D. 3/23
LEE'S
LEES - Flush Mount Rod Holder
SHIPS FREE IN LOWER 48 STATES
Zero Degree 2.25" O.D.
RH-532VS Large 0° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
SKU:
31127
|
Click for larger image
|
|
Zero Degree Flush Mount Stainless Steel Heavy Duty Bar Pin - 2" O.D.Lee's 1/24
LEE'S
LEES - Flush Mount Rod Holder Zero Degree 2.0" O.D.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Heavy Duty Bar Pin
All Stainless Steel
RH-527VS/XS Medium 0°
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Serving charter captains and consumers world wide.
RH527VS/XS
|
Click for larger image
|
|
Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D. 3/23
LEE'S
LEES-Flush Mount Rod Holder Zero Degree 2.25" O.D.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Heavy Duty Bar Pin
All Stainless Steel
RH-532VS/XS Large 0°
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 year
RH532VS/XS
|
Click for larger image
|
|
Zero (0) Degree SS Flush Mount Swivel Base Rod Holder Lee's - 2" x 9" - Medium 7/22
LEES
Swivel Base Flush Mount Rod Holder
SHIPS FREE IN LOWER 48 STATES
Part #: RH-5367SS
Medium 0 Degree Stainless Steel
Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
|
Image Not Available
|
|
Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length 2.0" O.D. 3/23
LEE'S
LEES -RH5167V Stainless Steel Swivel Base Flush Mount Rod Holder
- Medium Length 2.0" O.D.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
Vertical 0° Short Tube
Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
RH5167V
|
Click for larger image
|
|
Flush Mount Rod Holder 0° Lee's Stainless Steel Heavy Duty - Swivel Base 2.25" OD X 10.5" Tube 9/24
LEE'S
LEES- Swivel Base Rod Holder Zero Heavy Duty
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
RH577V
Vertical 0°
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
Use 31174 Backing Plate
SKU:
31164
|
Click for larger image
|
|
Flush Mount Rod Holder - Extra Lone Tube HD 0° Lee's Stainless Steel Swivel Base - 2.25" OD X 14.5" Tube 9/24
LEE'S
LEES- Swivel Base Rod Holder Heavy Duty Zero Degree 2.25" O.D.
SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS
RH577XL
Vertical 0° Extra Long Tube
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod
holder.
Uses backing plate 31174
- RH5930
RH577X
|
Click for larger image
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
