Part Number: PKQRB

Quick Release Mount Features

The quick release mount was designed for charter captains but has been adopted by many fisherman who were looking to quickly remove and store rod holders from their boat with no loose pieces (such as thumbscrews) to misplace.  The unit can simply be secured to your boat in seconds.

 The bottom (or gunnel) plate will mount directly to the gunnel and the top plate will slide onto it. Our brass plunger secures it into place.  A machined aluminum stop (shown to the left) will ensure that the unit cannot go any further outboard than the gunnel plate.

This mount has become one of our top selling units due to its tight fitting design which incorporates the machined interlocking channels and our solid stainless steel plunger.  There is no “slop” when the gunnel plate is secured to the quick release top plate.  All pieces of this mount have been machined down from a solid billet aluminum.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

In addition to the radial movement we now offer two different style rod holders.  Our Pro Style will adjust infinitely between 0-90° and our Elite Style will adjust infinitely between 0-135°. Also, unlike some competitors who use a spring loaded screw to fit into a set of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The padded lever can be rotated to lock in any direction to meet the needs of each user.

In the bottom of each tube a machined extension mates with the cross cut in the rod handle butt to keep the rod from swaying.

  No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Part Number: PKQTM

  Track Mount Features

This track mount is perfect for fishermen who like the versatility of being able to move their rod holder units to many different locations.  The track mount will slide into the track and lock it in position by tightening the two thumbscrews.

We recommend this with Cisco’s Sure-Stop Track as it was designed to slide into and through the track as smoothly as possible.   This unit is compatible with Bert's, Traxstech and most major track systems.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainab

ility.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Part Number: PKQTS

  Thumbscrew Mount Features

The thumbscrew mount is designed for fishermen who would like to have the option of removing their rod holders easily at the end of the day for storage.  The bottom (gunnel) plate mounts directly to the gunnel and has four threaded holes for which the 1/4-20 x 3/4” thumbscrews secure to. 

 For additional mounting locations extra gunnel plates are available for purchase.  This allows you to move your rod holders from one location to another easily without having to purchase additional rod holders than necessary. Please refer to our Accessories page to view these extra mounting plates.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Part Number: PKQRB

CISCO-Quick Release Mount Features

The quick release mount was designed for charter captains but has been adopted by many fisherman who were looking to quickly remove and store rod holders from their boat with no loose pieces (such as thumbscrews) to misplace.  The unit can simply be secured to your boat in seconds.

 The bottom (or gunnel) plate will mount directly to the gunnel and the top plate will slide onto it. Our brass plunger secures it into place.  A machined aluminum stop (shown to the left) will ensure that the unit cannot go any further outboard than the gunnel plate.

This mount has become one of our top selling units due to its tight fitting design which incorporates the machined interlocking channels and our solid stainless steel plunger.  There is no “slop” when the gunnel plate is secured to the quick release top plate.  All pieces of this mount have been machined down from a solid billet aluminum.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

In addition to the radial movement we now offer two different style rod holders.  Our Pro Style will adjust infinitely between 0-90° and our Elite Style will adjust infinitely between 0-135°. Also, unlike some competitors who use a spring loaded screw to fit into a set of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The padded lever can be rotated to lock in any direction to meet the needs of each user.

In the bottom of each tube a machined extension mates with the cross cut in the rod handle butt to keep the rod from swaying.

  No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

**Pro Style rod holders shown with gold tubes. Please click on the option below to pick your style and color.