Part Number: PKLTR

The long cradle was originally designed for charter boats but has been adopted by many fishermen with a smaller size deck.  The unit was engineered to allow the reel to be held further up the cradle keeping more of the rod handle out of the boat.  There is a security ring at the end of the cradle which can be quickly engaged/disengaged.

Charter captains use of the long cradle allows for comfort and freedom for their customers to move around the deck. 

This product is great for pulling dipsy's and trolling with Muskie lures!

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

Track  Mount Features

This mount is designed for inside track dimensions of 3” wide and ¼” thick (Cisco, Bert’s, Traxstech, Cannon and Tite-lok).  The plate will slide into the track and will lock in place with two thumbscrews.  

For the finest quality track at the least expensive price compared to our competitors check out our Sure-Stop Track and see why every one is making the switch to our premier track system

Short Cradle (Dipsy)

Part Number: PKSCC/PKSCT/PKSCR -CR

The short cradle is designed for quick and easy removal of the fishing rod.  The rods reel will sit in the cut out recession against the base of the cradle and the rod handle will sit safely into the boat.  This design works well for pulling boards as well as running your rod tips near the water for Muskie fishing.

There is a recession in where the reel sits in the cradle to help protect the rod and assist in keeping it from spinning in the cradle.  There is also a trigger slot at the far end of the cradle to ensure that rods with triggers on them sit comfortably in the cradle.

Many people find that staggering their rods at different heights works well to keep their lines and boards from crossing!  Check out our different length Riser Mounts to see which sizes may best suit your needs!

If you are looking to bury your rod tip into the water we do have "chicken rings" available as shown in the photo's of our Long Cradle Rod Holder.  This option is great if you plan to bury your rod tips in the water or if you want to tilt your rod up vertically and lock them in place when cruising between destinations.

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

This product is great for pulling dipsy's and trolling with Muskie lures!

Part Number: PKLRM Select 7/8" or 1.0" Rail Size (Prices for custom rail sizes if available will be conveyed to the customer once we know the size and availablility)

The long cradle was originally designed for charter boats but has been adopted by many fishermen with a smaller size deck.  The unit was engineered to allow the reel to be held further up the cradle keeping more of the rod handle out of the boat.  There is a security ring at the end of the cradle which can be quickly engaged/disengaged.

Charter captains use of the long cradle allows for comfort and freedom for their customers to move around the deck. 

This product is great for pulling dipsy's and trolling with Muskie lures!

Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.  

Thumbscrew Rail Mount Features

Our newly designed thumbscrew rail mount gives the user additional options than the rail mount described above.  As shown to the right, the rod holder is attached to a top plate with two thumbscrews and can be attached/unattached leaving only the slim fitted mount attached to the rail.  

 Users found this mount most practical when frequently removing the rod holders from their boat for storage or to re-attach the slim fitted boat cover.

 If you are more of a casual fisherman and prefer to have multiple placements around your boat you may also purchase additional base mounts.  This option allows you to move your rod holders from base to base rather than purchasing additional rod holders than necessary.

Tube Style Rod Holder

The inside diameter of each aluminum tube is 1 5/8". The wall of the tube is 3/16" thick creating the most rigid tube on the market.  This heavy wall tube gives us the ability to machine a smooth radius on top thus no rubber caps to come loose.

 

The positive locking head of the Cisco Fishing Systems rod holder will adjust to any angle from zero up to 90 degrees by actuating the padded lever. The rod holder simply indexes in a radial movement every 18 degrees by lifting and turning the spring-loaded mechanism. These features offer the fisherman a multitude of possibilities for positioning their rods. They are available as single, double, triple and quad setups.

 

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.  In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. The lever can be rotated in any direction to meet the needs of each user. In the bottom of each tube is a machined extension which mates with the cross cut in the rod holder butt to keep the rod from swaying.  No tools are required for positioning of the rod holder. All aluminum components are anodized to military specs.

Part Number: PKSSM

SLIM MOUNT

Thumbscrew Mount Features

This thumbscrew mount is for use with a single rod holder and comes with two separate plates.  The rod holder will mount to the top plate and the bottom plate will mount directly to the gunnel.  The two plates are secured together by two thumbscrews and can be easily disassembled for removal/storage from the gunnel.

The dimensions of the base are 2" x 4" and is machined from solid aluminum and clear anodized finish.  The narrow 2" width allows this mount to fit great on gunnels with a slim top mounting surface.  Thumbscrews secure into  1/4-20 threaded holes.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Part Number: PKSTM

  Track Mount Features

This track mount is perfect for fishermen who like the versatility of being able to move their rod holder units to many different locations.  The track mount will slide into the track and lock it in position by tightening the two thumbscrews.  

We recommend this with Cisco’s Sure-Stop Track as it was designed to slide into and through the track as smoothly as possible.   This unit is compatible with Bert's, Traxstech and Tite-lok track systems.

  Adjustability of the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.

Rod Holder Color Options

              CiscoTube Style Rod Holder

                                                choose color and Std or Thumbscrew Rail Mount

              

Select your Rod Holder Color from the options on right !

 

Rod Holder Features

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever.  The lever can be rotated in any direction so it locks in the downward position.  In the bottom of each tube  a machined extension  mates with the cross cut in the rod handle butt to keep the rod from swaying.

 No tools are required for positioning of the rod holder.   All aluminum components are anodized to military specs.

 

 

Part Number: MTTSS

This thumbscrew mount is for use with a single rod holder and comes with two separate plates.  The rod holder will mount to the top plate and the bottom plate will mount directly to the gunnel.  The two plates are secured together by two thumbscrews and can be easily disassembled for removal/storage from the gunnel.

The dimensions of the base are 3" x 4" and is machined from solid aluminum and clear anodized finish. Thumbscrews secure into  1/4-20 threaded holes.

 

 

 PATRIOT CRADLE ROD HOLDER

 

The Patriot cradle is one of our most universal rod holders and is designed to accept a wide variety of different style fishing rods.  For anglers who fish for different species this holder will accept your trolling rods, line counters, bait casters. spinning rods, and fly rods.  There are many different locations to rest your reel, and the various slots allow for rods with triggers to be positioned without interference.  For anything from drifting, bottom bouncing to trolling this rod holder is a solid bet!

 Product Features

The cradle style rod holders are designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism.  When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring long lasting sustainability.

In addition to the radial movement, the cradle will adjust to any angle from 0-135° by actuating the padded lever.  The lever can be rotated in any direction to meet the needs of each user.  No tools are required for positioning of the rod holder.  All aluminum components are anodized to military specs.

The cradle rod holder is designed to ensure quick removal of  the rod from the holder.  The handle of the rod can be removed by tilting it up vertically and freeing it from the cradle.

Part Number: PKSRM

Thumbscrew Rail Mount Features

 

Note: Price for custom rail size, if available will be conveyed to the customer once the rail size information is received.

 

Please measure the outside diameter of your rail, most common are 7/8", some are 1.0"

Our newly designed 7/8” or 1" thumbscrew rail mount gives the user additional options than the rail mount described above.  As shown to the right, the rod holder is attached to a top plate with two thumbscrews and can be attached/unattached leaving only the slim fitted mount attached to the rail.  

 Users found this mount most practical when frequently removing the rod holders from their boat for storage or to re-attach the slim fitted boat cover.

If you are more of a casual fisherman and prefer to have multiple placements around your boat you may also purchase additional base mounts.  This option allows you to move your rod holders from base to base rather than purchasing additional rod holders than necessary.

  Adjusting the Rod Holders

The tube style rod holder is designed to index 360° with 20 interlocking positions by simply lifting and turning our exclusively engineered spring loaded mechanism. When engaged, it is secured by machined teeth around the entire circumference for virtually no wear on the product ensuring a lifetime of sustainability.

 In addition to the radial movement, the tube will adjust to any angle from 0-90° by actuating the padded lever. Unlike some competitors who use a spring loaded screw to fit into a couple sets of pre determined holes, our system allows for infinite adjust-ability with superior strength, and a secured tight fit with no slop.  The lever can be rotated in any direction to meet the needs of each user.

 No tools are required for positioning of the rod holder and comes with a Lifetime Limited Warranty. All aluminum components are anodized to military specs.