Xantrex PV Single Connecter (1 Pair) is available to buy in increments of 1.

Remote Battery Temperature Sensor

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Sends precise information to the charger or charge controller, which automatically adjusts voltage to ensure full battery charge depending on the ambient temperature of your battery installation.

10A Solar Charge Contoller - 12/24V

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Features:

• Advanced micro-controller with Series Type PWM Charging
• 10A charging for 12V / 24V Lead Acid, Sealed AGM Batteries with auto mbattery voltage detection
• 10A rated load terminals with protection for low battery disconnect
• Integrated battery voltage temperature compensation to prevent under/over charging 
• User friendly LED display for monitoring
• Suitable for up to 160W panels for 12V battery / up to 320W panels for 24V battery

Solar Charge Controller - 12V - 8A

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

The SCC-1208L Charge Controller is Micro-controller based for automatic, intelligent operation designed for 12 V nominal solar panels and 12 V battery systems. It has 3 Stage charging (Bulk, Absorption, Float) for 100% return of capacity and long battery life. It can be used with 2 types of batteries: Flooded/Web Cell or Sealed AGM. The SCC-1208L can manage up to 150 Watts of Solar Power.

Features:

• Micro-controller based for automatic, intelligent operation
• Designed for 12V nominal solar panels and 12V battery systems
• 3 Stage charging (Bulk, Absorption, Float) for 100% return of capacity and long battery life
• For use with 2 types of batteries: Flooded/Wet Cell or Sealed AGM
• Totally sealed, splash proof weather resistant design (Ingress Protection Rating IP65)
• Automatically turns on lights when dark and turns off during the day
• Mosfet based reverse current blocking prevents night-time battery discharge and lowers power loss
• Protections: Overload, Over-Temperature, Battery Under/Over Voltage, Reverse Polarity
• Wide operating temperature range of -40°C to + 60°C

Specifications:

• Input: 12V
• Amps: 8 Amps
• Weight: 0.28 (lbs) / 0.13 (kg)
• Dimensions: 3.8 x 1.8 x 1.0 (in)
• Dimensions: 9.65 x 4.57 x 2.54 (cm)
• Safety: FCC, CE, IP65
• Warranty: 5 Year Limited

Applications:

• Off-grid mobile rural systems
• Rural electrification
• Power supply for remote equipment
• Monitoring systems for the oil & gas industry
• Traffic, security, environment, and other remote monitoring and signaling systems
• Water pumping systems

MPPT Charge Controller Remote Panel with 25' Cable PPT Remote Display

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Provides real-time data about your solar system. Designed for quick and easy installation. Includes 25' cable

.

5W Battery Maintainer Portable SunCharger

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

The SC-05 SunCharger maintains the charge in any 12V battery using energy from the sun. Panel connects through 12V power plug or directly to battery with ring terminals. 

Perfect for battery maintenance when your car, boat, truck, ATV or RV is in storage.

Features:

• Maximum efficiency
• Prevents back flow of current from the battery to the panel
• Direct charging – no need for additional Charge Controller
• Semi-flexible panel construction
• Rugged, weather-proof design
• 10' cable attached
• 1' cable with 12V power plug 
• 1' cable with ring terminals for battery

Specifications:

• Weight - 0.8 (lbs)
• Weight - 0.44 (kg)
• Dimensions - 8.03 x 11.22 x 0.52 (in)
• Dimensions - 20.4 x 28.5 x 1.3 (cm)
• Warranty - 2 Years (Canada/US)

Applications:

• Service Vehicles
• Fleet
• Marine
• ATV's
• Private Aircrafts
• Cars
• Trucks
• Motorcycles
• Recreational Vehicles

PV Extension Cable - 15'

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Features:

• Length: 15'
• PV Extension Cable

10W Battery Maintainer Portable SunCharger

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

The SC-10 SunCharger maintains the charge in any 12V battery using energy from the sun. Panel connects through 12V power plug or directly to battery with ring terminals. 

Perfect for battery maintenance when your car, boat, truck, ATV or RV is in storage.

Features:

• Maximum efficiency
• Prevents back flow of current from the battery to the panel
• Direct charging – no need for additional Charge Controller
• Semi-flexible panel construction
• Rugged, weather-proof design
• 10' cable attached
• 1' cable with 12V power plug 
• 1' cable with ring terminals for battery

Specifications:

• Weight - 2.2 (lbs)
• Weight - 0.99 (kg)
• Dimensions - 12 x 15 x 0.53 (in)
• Dimensions - 30.5 x 38.1 x 1.35 (cm)
• Warranty - 2 Years (Canada/US)

Applications:

• Recreational Vehicles
• Boats
• ATVs
• Cars
• Trucks

C-Series Solar Charge Controller - 12 Amps

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

PV charge, lighting and load controller

The C12 charge, lighting, or load controller is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization.

Standard in the C12’s load control circuitry are field adjustable low voltage disconnect and reconnect points, along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller.

Lighting run time is adjustable from two to eight hours or can be set from dusk to dawn operation. It is used worldwide in a variety of applications, including remote village lighting systems and automatic outdoor lighting. An optional battery temperature sensor manages battery charging based on battery temperature.

Features:

• Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
  • Two-year standard warranty
  • PV charge and load controller
  • Automatic lighting controller
  • Electronic detection of short-circuit, overload, over-temperature and reverse polarity conditions
  • Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
  • Field adjustable voltage and battery set point
  • Automatically disconnects from the battery at night
  • Compatible with negative ground and ungrounded systems

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

C-Series Solar Charge Controller - 35 Amps

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

PV charge, diversion and load controller

The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.

A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.

Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.

Features:

• Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
• Two-year standard warranty
• PV charge, diversion, load controller
• Available remote display with cumulative AMP hours
• Electronic protection against short-circuit, overload, and over-temperature conditions
• Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
• Field adjustable voltage and battery set point
• Automatically disconnects from the battery at night
• Compatible with negative ground and ungrounded systems

Flush Mount Solar Charge Controller w/LCD Display - 30A

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

The Samlex 30 Amp Charge Controller regulates current and protects your batteries from over-charging. Features of this 4-stage Charger include: LED status indicators, digital LCD monitor and 8 charge settings for most battery types. Charging is further regulated with the optional DC-BTS-A-C Battery Temperature Sensor.

Features:

• Pulse Width Modulated (PWM) charging – most efficient and effective way to charge batteries
• 4-stage battery charging: Bulk, Absorption, Float and manual / automatic Equalization
• 8 selectable battery charging profiles for easy setup
• Temperature compensated charging with optional Temperature Sensor
• Digital LCD Monitor for informative display of operational parameters and fault messages

Specifications:

• Input: 12V / 24V
• Amps: 30 Amp
• Weight: 0.8 (lbs)
• Weight: 0.36 (kg)
• Dimensions: 7.5 x 4.25 x 1.5 (in)
• Dimensions: 19.1 x 10.8 x 3.8 (cm)
• Warranty: 5 Year Limited

Applications:

• Recreation vehicles
• Service vehicles
• Boats
• Field work
• Telecommunications
• Mobile offices
• Construction sites

C-Series Solar Charge Controller - 40 Amps

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

PV charge, diversion and load controller

The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.

A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.

Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.

Features:

• Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
• Two-year standard warranty
• PV charge, diversion, load controller
• Available remote display with cumulative AMP hours
• Electronic protection against short-circuit, overload, and over-temperature conditions
• Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
• Field adjustable voltage and battery set point
• Automatically disconnects from the battery at night
• Compatible with negative ground and ungrounded systems

30A PWM Charge Controller

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Designed to charge lithium-ion batteries including LIFePO4, the 30 A PWM (Pulse Width Modulation) charge controller features a flush mount industrial design for a clean finish. 

The Xantrex Solar PWM Charge Controller 30 features a highly-efficient PWM charging mode, designed specifically for an aesthetically clean and integrated look in an RV, boat, and truck. Intuitive and easy-to-program to get your solar system harvesting energy as quickly as possible. Equipped with best-in-class PV array and battery protections and a built-in LCD display providing real-time system data. Optional accessories include a remote battery temperature sensor.

Features:

• Advanced multi-stage charging technology, Bulk, Absorption, Float, Equalization
• Battery types supported: Sealed (AGM), Gel, Flooded, Lithium Iron Phosphate (LiFePO4)
• Best-in-class PV array and battery protections
• Aesthetic flush-mount industrial design
• 5-year warranty

C-Series Solar Charge Controller - 60 Amps

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

PV charge, diversion and load controller

The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.

A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.

Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.

Features:

• Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
• Two-year standard warranty
• PV charge, diversion, load controller
• Available remote display with cumulative AMP hours
• Electronic protection against short-circuit, overload, and over-temperature conditions
• Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
• Field adjustable voltage and battery set point
• Automatically disconnects from the battery at night
• Compatible with negative ground and ungrounded system

30A MPPT Charge Controller

 

SHIPPING INCLUDED TO LOWER 48 STATE DESTINATIONS

Designed to charge lithium-ion batteries including LIFePO4, the 30 A MPPT (Maximum Power Point Tracking) charge controller features an industry-leading 98% charging efficiency and dual bank output to charge and maintain house and starter batteries. 

The Xantrex Solar MPPT Charge Controller 30 features advanced Maximum Power Point Tracking (MPPT) technology, providing an instant upgrade to your solar system with up to 30% more power compared to PWM charge controllers. Offering greater flexibility, simplicity, and efficiency in PV array designs, higher voltage PV arrays can be used up to 72V (nominal). Equipped with dual-battery bank charging ports ideal for simultaneously charging and maintaining 12V house and starter batteries, best-in-class PV array and battery protection, and a built-in LCD display providing real-time system data. Optional accessories include a remote battery temperature sensor and remote panel. 

The Xantrex Solar Charge Controllers are compatible with all types and makes of solar panels from all manufacturers. Below is a list of available Xantrex Solar Panel Kits and Expansion Kits. Consider pairing this MPPT charge controller with Xantrex Solar Panels. 

Features:

• Advanced Maximum Power Point Tracking (MPPT) technology increasing daily energy harvest by 20-30% compared to PWM technology
• Dual-battery bank charging to simultaneously charge house and starter batteries
• Best-in-class PV array and battery protections
• House battery types supported: Sealed (AGM), Gel, Flooded, Lithium Iron Phosphate(LiFePO4)
• 5-year warranty